AeroWorks Extra 260 User Manual download pdf (Page 6)

Horizontal Stabilizer with elevator assembly with (6)

CA hinges (not glued)---covered Elevators Pre-drilled

for the mounting of the control horns

Rudder with (4) CA hinges (not glued) – covered

Rudder Pre-drilled for the mounting of the control

horns and pre-drilled for steering arm

SUB ASSEMBLIES:

#1:

(1) Fiberglass Cowling—painted with (6) screws

holes

(6) 4-40x10mm hex style bolts for mounting cowling

(6) #6 bonded washers for mounting cowling

(6) 3mm split lock washers for mounting cowling.

#2:

(1) 3mm 7075Aluminum Main Landing Gear --

painted

(2) 4x33mm Axle Bolts

(2) M4 lock nuts

(4) 4mm i.d. Wheel Collars with set-screws

(2) 64mm Dia. Main Wheels

(4) 4-40x10mm hex style bolts for mounting wheel

pants

(4) 3mm flat washer for mounting wheel pants

(4) 3mm split ring lock washer for mounting wheel

pants

(3) 6-32x15mm hex head bolts for mounting main

landing gear

(3) 3.5mm flat washers for mounting main landing

gear

(3) 3.5mm split washer for mounting main landing

gear

#3:

(2)Wheel Pants—1 Left and 1 Right---Painted

(4) 4-40 blind nuts installed on the wheel pants, 2 per

side

#4:

(1) Tail Wheel Assembly – Small

#5:

(1) 23mm o.d. carbon with fiberglass filled wing tube

(2) 6-32x25mm Hex head bots for wing mounting

(2) #6 bonded washer for wing mounting

(4) 1.2mm cotter pins

#6:

(3) 1.8x300mm one end threaded pushrod with metal

clevis and half nylon clevis on the other end

(1) 5mm o.d.x350mm plastic tube – throttle pushrod

outside tube

(1) 3.2mm o.d.x300mm throttle pushrod

(2) 2.1x22mm threaded rod with nylon clevises

(1) 1.8x300mm push rod with Z bend on one end

(1) 3.5mm o.d. x300mm push rod sleeve

(1) Easy Connector

(2) Plywood plastic tube holder

#7:

(2) 0.8x800mm plastic coated pull-pull steel cable

(7) M2 Metal R/C links with metal clevises and nuts

(4) 2x3mm brass pull-pull swaging tubes

(5) Nylon control horns

(3) Nylon control horn base plates

(6) M2x25mm Phillips head mounting bolts

(2) M2x15mm Phillips head mounting bolts

(2) M2 hex nuts

#8:

(1) 450cc (15 oz) Fuel Tank assembly

(1) 1ft. glow fuel line - clear

(1) 1 ft. glow fuel line - color

#9:

(1) 2-1/4” White Spinner Assembly

#10:

(2) .60 size engine mounts, 1 left and 1 right

(8) 6-32 x25mm hex head bolts

(8) 3.5mm flat washers

(8) 3.5mm split lock washers

(4) 6-32 lock nuts

(4) 6-32 blind nuts for electric version

#11:

60x130x60mm foam rubber for bottom of fuel tank

(1) 25x25x70mm foam rubber for front of fuel

tank

(4) 3x145mm Nylon ties

(2) 5x450mm Nylon ties

(3) 610x20mm Velcro Strap

(1) 8”x10” card stock for cutting out cowling

(1) Air inlet template for cutting front of cowling

(2) Air inlet – plastic vacuumed

(1) Throttle servo tray

(1) Spacer Plate (Electric)

#12:

Paper Rudder Deflection Meter – Small

#13 Decal set

1 2 3 4 5 6 7 8 9 10 11 ... 55 56

Comments to this Manuals

No comments

AeroWorks Extra 260 User Manual Page 6

Comments to this Manuals

Related products and manuals for Toys & accessories AeroWorks Extra 260