AeroWorks Extra 260 User Manual download pdf (Page 13)

Aileron Servo Installation

1. The ailerons have been pre-hinged and glued

to the wing panels and are ready for flight. No

other steps are necessary for hinging.

Note: We have supplied clear Ultracote for

sealing the hinge gaps. This is an optional step

but is recommended

WING ASSEMBLY

2. Layout the servo on the wing to test fit the in-

stallation and ensure servo lead is the correct

length.

Note: 180 in. oz. digital, metal geared servos

are recommended. Servo selection can be the

difference between a great flying model and a

model that will crash. Always use brand name

high quality servos.

3. Attach the 18” extension to the servo lead and

secure with safety wire, string, tape, or other

method. Ensure the plugs will not come apart

from vibration or light tension.

4. Fasten the pull string from the servo hole to

the male plug of the servo extension. Secure

with tape so that the strings pulls from the

front end of the plug

. Taper the tape to

avoid hang-ups inside the wing.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 92 93

No comments

AeroWorks Extra 260 User Manual Page 13